260Ci Wia Driver Windows 10

The Code 10 error is one of several Device Manager error codes. It's generated when Device Manager can't start the hardware device, a situation usually caused by outdated or corrupted drivers.

A device may also receive a Code 10 error if a driver generates an error that Device Manager doesn't understand. In other words, a Code 10 error can sometimes be a very generic message indicating some kind of unspecified driver or hardware problem.

The Code 10 error will almost always display in the following way:

Details on Device Manager error codes like Code 10 are available in the Device Status area in the device's properties. See How to View a Device's Status in Device Manager for help.

The Code 10 error could apply to any hardware device in Device Manager, though most Code 10 errors appear on USB and audio devices.

Any of Microsoft's operating systems could experience a Code 10 Device Manager error including Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and more.

Important:Device Manager error codes are exclusive to Device Manager. If you see the Code 10 error elsewhere in Windows, chances are it's a system error code or software-specific error, which you should not troubleshoot as a Device Manager issue.

How to Fix a Code 10 Error

  1. Restart your computer if you haven't done so already.

    There is always the chance that the error Code 10 you're seeing on a device was caused by some temporary problem in Device Manager or with the hardware. If so, a reboot, like in many situations, might fix the Code 10 error.

  2. Did you install a device or make a change in Device Manager just before the Code 10 error appeared? If so, it's possible that the change you made caused the Code 10 error.

    Undo the change if you can, restart your PC, and then check again for the Code 10 error.

    Depending on the changes you made, some solutions might include:

    • Removing or reconfiguring the newly installed device
    • Rolling back the driver to a version prior to your update
    • Using System Restore to undo recent Device Manager related changes
    • Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error.

    If a USB device is generating the Code 10 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.

    Properly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver and then letting Windows install it over again from scratch.

  3. Update the drivers for the device. It's also very possible that installing the latest drivers for the device could correct the Code 10 error, even if these drivers were previously functional.

    If this works, it means that the stored Windows drivers you reinstalled in Step 3 were either a) damaged, or b) outdated with a problem that the more up-to-date drivers corrected.

    Be sure to check for the latest drivers from your computer and device manufacturer (if applicable) since one may have a more recent driver available than the other.

  4. Install the latest Windows service pack. Microsoft often releases service packs and other patches for Windows, one of which might contain a fix for the Code 10 error.

  5. Delete the UpperFilters and LowerFilters values in the registry. Two particular values in the Windows Registry could be corrupted, causing the Code 10 error.

    While this isn't a very common solution to a Code 10 issue, it is for many other Device Manager error codes. Don't be afraid to try this if the previous ideas haven't worked.

  6. Try an older driver version, or one for the previous version of Windows. Almost all manufacturers continue to provide previously available drivers on their websites.

    This trick doesn't work to fix Code 10 errors very often, and when it does, it probably means that the latest driver provided by the manufacturer has serious problems, but it's worth a shot before trying the next few steps.

    Try using DriverHub to install an older driver if you can't find it on the manufacturer's website.

  7. Purchase a poweredUSB hub if the Code 10 error is showing up for a USB device.

    Some USB devices require more power than the USB ports in your computer can give it. Plugging those devices into a powered USB hub circumvents that issue.

  8. Replace the hardware. A problem with the hardware device itself might be causing the Code 10 error, in which case replacing the hardware is your next logical step.

    Another possibility, while not very likely, is that the device is not compatible with your version of Windows. You can always check the Windows HCL to be sure.

  9. If you're positive that a hardware problem isn't causing the Code 10 error, you could try a repair install of Windows. If that doesn't work, try a clean install of Windows. I don't recommend doing either before you replace the hardware, but you may have to give them a try if you're out of other options.

Please let me know if you've fixed a Code 10 error using a method that I don't have above. I'd like to keep this page as accurate as possible.

Need More Help?

If you don't want to fix the Code 10 problem yourself, see How Do I Get My Computer Fixed? for a full list of your support options, plus help with everything along the way like figuring out repair costs, getting your files off, choosing a repair service, and a whole lot more.

Message 1 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

‎08-09-201707:58 PM

Microsoft Windows 10 (64-bit)

I have a

HP Notebook - 15-ba021ax laptop..It has AMD processor and runs windows 10 64 bits.

In the device manager window I found the following errors as yellow exclamation points.

1)Imaging devices->260ci WIA Driver(USB) [manufacturer:Kyosera]

Device status shows the message : 'This device cannot start. (Code 10)

The specified request is not a valid operation for the target device.'

2)other devices->PCI Encryption/Decryption controller

Device status shows the message :

'The drivers for this device are not installed. (Code 28)

There are no compatible drivers for this device.

To find a driver for this device, click Update Driver.'

When I tried updating it showed windows could not find driver

3)the same exact error as the one above for my SM bus controller and five other unknown devices

4) sd host adapters->SDA Standard compiant SD host controller

The device status shows :

'

This device is currently waiting on another device or set of devices to start. (Code 51)

Dependencies:
ACPIAMD00300

'

How can I solve these errors?

Reply
9 REPLIES 9
Message 2 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-09-201711:24 PM

Do you have HP Support Assistant installed? If so open it and let it scan for drivers. If you don't have it installed use this download:

Or go to your Support page and install drivers. Latest AMD Graphics first.Restart the laptop. Realtek Card Reader driver is needed for SDA Standard compiant SD host controller

**Click Accept as Solution on a Reply that solves your issue**
***Click the Thumbs-Up button as a way to say Thanks!***

Reply
Message 3 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-10-201707:02 AM

Hi, @CLOUDENVY :

Download and install the AMD Chipset drivers and restart the PC. You want the 1st file listed on the webpage.

That will install a good number of those devices.

Reply
Message 4 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-10-201709:19 PM

I do have the hp support assistant installed and have the latest version of drivers installed.If I am missing something,please tell me.I have attached the pic of all the drivers I have installed.

Reply
Message 5 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-10-201709:22 PM - edited ‎08-10-201710:01 PM

I have an AMD HD graphics driver installed.Is it the same?

EDIT: i installed the chipset friver and all errors are gone except one.i.e the 260ci WIA driver..

I have attached the pic below

Reply
Message 6 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-10-201709:25 PM - edited ‎08-10-201709:35 PM

Do you still have errors showing in Device Manager? If so install the first file as mentioned above. Restart the laptop after installing.

**Click Accept as Solution on a Reply that solves your issue**
***Click the Thumbs-Up button as a way to say Thanks!***

Reply
Message 7 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-10-201710:03 PM

Yes.I did install it and all errors but one are gone.

The 260ci WIA driver still shows the same error..

Reply
Message 8 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-11-201706:55 AM

Hi:

The 260ci WIA device is your Kyocera 260ci scanner that needs a driver.

Unfortunately, I can't help you with that.

I suggest you use the latest driver from the manufacturer's support page.

Reply
Message 9 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-11-201707:46 PM

Reply
Message 10 of 10
Flag Post
  • Mark as New
  • Bookmark
  • Subscribe
  • Email to a Friend

Solved!

DRIVER PROBLEM

‎08-11-201708:14 PM

Reply
  • Open Menu

Didn't find what you were looking for? Ask the community

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation